The Quick Fix You Should Try First
Before assuming the worst, check under the agitator (center of the drum). Here’s what you need to do:
Step 1: Turn Off the Machine and Unplug It
Safety first! Never work on a plugged-in appliance.
Step 2: Inspect the Agitator Area
- Remove the cap from the agitator (center post of the drum).
- Look for loose screws, debris, or worn-out parts.
Step 3: Tighten the Loose Screws
Using a screwdriver, gently tighten any visible screws in the agitator or drum area. This can help stabilize the washing motion.
Step 4: Check for Foreign Objects
If you find coins, small tools, or other debris, remove them carefully. These items can cause excessive noise and unbalance.
Step 5: Test the Machine
Run a quick spin cycle with no clothes to check if the issue is resolved. If it runs smoothly, you’ve just saved yourself an expensive repair!
Additional Tips for a Stable Wash
- Always distribute clothes evenly to avoid unbalanced loads.
- Keep your washer level by adjusting the legs if necessary.
- Inspect the drum bolts periodically to keep them secure.
By following these simple steps, you can eliminate loud banging noises and shaking in your washing machine without using special tools or hiring a technician. Try this trick today and restore peace in your laundry room!
